Structural Parts
Automotive Components
Industrial Equipment
Tooling Fixtures
Filament Features
Print Preview
Print Advantages
High Strength & Rigidity
The addition of glass fibers significantly improves mechanical properties, with tensile modulus reaching 5118MPa and flexural modulus 4135MPa, over 50% higher rigidity than standard PA materials, capable of replacing metal parts in high-load applications.
Exceptional Dimensional Stability
Glass fibers effectively inhibit shrinkage and warpage during printing, maintaining high precision even for large parts with dimensional deviation less than 0.2%, achieving precision-fit parts without complex post-processing.
Superior Heat Resistance
Heat Deflection Temperature of 180℃, capable of long-term stable operation in high temperature environments, suitable for under-hood automotive and industrial equipment applications, approximately 60℃ higher temperature resistance than standard PA materials.
対応3Dプリンター
CreatBot工業用3Dプリンターは高性能材料向けに設計されています。以下の機種は加熱チャンバーと高温ノズルを搭載し、プロ仕様の結果を提供します。
Technical Data Sheet
| Physical Properties | Test Method | Typical Value |
|---|---|---|
| Density | ISO1183 | 1.27g/cm³ |
| Water Absorption | 25℃，55%RH | 1.75% |
| Melt Flow Index | 300℃，2.16kg | 7.6g/10min |
| Melting Temperature | IOS11357 | 237℃ |
| Mechanical Properties | Test Method | Typical Value |
|---|---|---|
| Tensile Strength XY | ISO527 | 86MPa |
| Tensile Strength Z | ISO527 | 59MPa |
| Tensile Modulus XY | ISO527 | 5118MPa |
| Tensile Modulus Z | ISO527 | 3952MPa |
| Elongation at Break XY | ISO527 | 2.71% |
| Elongation at Break Z | ISO527 | 1.78% |
| Flexural Strength XY | ISO178 | 137MPa |
| Flexural Strength Z | ISO178 | / |
| Flexural Modulus XY | ISO178 | 4135MPa |
| Flexural Modulus Z | ISO178 | / |
| Impact Strength XY | ISO179 | 7.97kJ/m² |
| Impact Strength Z | ISO179 | / |
| Thermal Properties | Test Method | Typical Value |
|---|---|---|
| Vicat Softening Temperature | ISO306 | / |
| Heat Deflection Temperature （at 0.45MPa） | ISO75 | 180℃ |
| Print Parameters | |
|---|---|
| Drying Conditions | 80-100℃，6-8H |
| Nozzle Temperature | 300-320℃ |
| Nozzle Diameter | 0.4 / 0.6 / 0.8 / 1.0 mm |
| Bed Surface Treatment | 3D 打印喷雾/ PVP 固体胶/ 专用胶水 |
| Bed Temperature | 70-90℃ |
| Chamber Temperature | / |
| Cooling Fan | OFF |
| Print Speed | 30-120 mm/s |
FAQ
UltraPA-GF uses glass fiber reinforcement for higher stiffness and heat resistance, with HDT of 180℃, ideal for high rigidity and high temperature applications; UltraPA-CF uses carbon fiber for lighter weight and higher strength, suitable for weight-sensitive applications. Choose based on specific needs: GF for high rigidity, CF for lightweight.
Thorough drying before printing (80-100℃, 6-8 hours), nozzle temperature 280-320℃ recommended, bed temperature 70-90℃, use hardened steel or ruby nozzle to resist glass fiber wear, print speed 30-120mm/s, chamber insulation for better results.
Compatible with all CreatBot high-temperature industrial 3D printers, including D400 HS, D600 Pro3 HS and other models. Requires printer with nozzle temperature above 300℃, constant temperature chamber and high-temperature bed for optimal results.
Saturated water absorption is 1.75%, moisture absorption leads to print quality degradation and performance reduction. Must dry at 80-100℃ for 6-8 hours before printing, sealed storage recommended after printing or use in dry environments.
Suitable for various industrial parts: structural brackets, automotive under-hood components, industrial equipment housings, tooling fixtures, heat-resistant functional parts, electrical insulation parts, etc. Especially suitable for applications requiring high rigidity, heat resistance and dimensional stability.
Heat Deflection Temperature (HDT) is 180℃ (tested at 0.45MPa), Vicat softening temperature over 200℃, capable of long-term stable operation below 150℃, can withstand higher temperatures short-term, suitable for automotive and industrial high-temperature applications.
