D600 SE

Affordable and Reliable Large 3D printer

The CreatBot D600 SE was created to make industrial 3D printing of large-scale objects and prototypes as easy as possible. It is embedded with many advanced technologies for ultra-big, impressive prints.

Affordable price plus a build size of 600*600*600mm makes it the best choice for your business. Trusted by 2000+ professional clients.

Get a quote Check Specs

What's New in D600 SE?

Dual Nozzle Shutter

Fully Automatic Synchronization

Up to 40% Faster Printing

Lightweight Auto-Rising Extruder

600*600*600mm³ Large Volume

True External Air Cooling

90 mm³/s Flow Rate

Stronger X Rail

Independent Quad-Z Axis

0.001mm Accuracy

Eddy Current Bed Leveling

60° Heated Chamber

Internal Insulation Cotton

Up to 40% Faster Printing

Lightweight Auto-Rising Extruder

0.001mm Accuracy

Eddy Current Bed Leveling

True External Air Cooling

60° Heated Chamber

Internal Insulation Cotton

90 mm³/s Flow Rate

Stronger X Rail

Independent Quad-Z Axis

600*600*600mm³ Large Volume

Dual Nozzle Shutter

Fully Automatic Synchronization

The First Layer Defines Print Quality

Equipped with automatic mesh bed leveling, our large-format 3D printers ensure an ultra-smooth and uniform first layer across the entire expansive platform for flawless printing results.

Z via Dual Photoelectric Sensor

Full-Auto Multiple Positioning

0.005mm Accuracy

Eddy Current Bed Leveling 0.001mm Precision

Revolutionizing Large-Scale Print Platform Calibration

The eddy current leveling system solves critical challenges in calibrating large build plates. Utilizing high-frequency electromagnetic sensing technology, it achieves an ultra-high probing accuracy of 0.001mm—improving precision by 99% compared to traditional methods. This ensures perfect first-layer adhesion and guarantees printing success even with oversized models.

Featuring a non-contact, zero-wear sensor design, the system performs continuous scanning without interruption, completing bed calibration in just 60 seconds—reducing leveling time by 80% and significantly improving printing efficiency.

Auto-Raising Dual Extruders | 420℃

Flow Rate:90 mm³/s

Heating to 400°C:2 Mins

Thermostat Accuracy:±0.15 °C

The D600 SE features a next-gen smart auto-raising dual-extruder kit, capable of reaching hotend temperatures up to 420 °C. The hotend can be quickly swapped for different nozzle sizes.

Enhanced with the upgraded Dual Nozzle Shutter technology, it delivers flawless printing with different support materials. Combined with a topologically optimized lightweight design, the printhead enables even higher printing speeds and greater motion agility.

Dual Nozzle Shutter

Auto-switch to backup nozzle on filament runout.

Left Nozzle

Right Nozzle

Active Heated Chamber | 60℃

The design employs a double-layer insulation cotton layer, allowing the cavity temperature to be raised to 80°C. This is crucial for preventing the shrinkage and deformation of large engineering materials.

Reduces Thermal Stress & Warping

Improves Interlayer Bonding

Minimizes Moisture Impact

Ensures Process Consistency

When printing large or high-strength engineering materials (e.g., ABS), uneven cooling causes internal thermal stress, leading to warping, delamination, or cracking.

Did You Know a Heated Chamber Can Warp Your Printer?

Ln large-format FFF 3D printing, when chamber temperature rises, the printer frame and structural components also undergo thermal deformation—metal expansion, axis misalignment, and mechanical part displacement. These micro-distortions accumulate layer by layer, ultimately leading to:

- Layer Misalignment and Surface Roughness
- Loss of Dimensional Accuracy
- Structural Defects in Large Parts

This is why treating chamber temperature as an optional add-on, or claiming it can be retrofitted later, proves these manufacturers just don't get it. They have no compensation for machine deformation—some aren’t even aware of the issue. They simply add it as a feature to drive sales, with total disregard for actual print quality.

With 8+ Years of R&D on the Chamber Temperature of FFF Industrial Printers

Our Solution: The Synergy of Two Patented Technologies—Intelligent Chamber Heating Algorithm & Z-Axis Magic Box Technology:

Intelligent Heating Algorithm: Predicts and counteracts irregular deformations caused by chamber temperature variations
Z Axis Magic Box: Maintains flawless surface finish via real-time thermal compensation for frame and build-plate expansion.
Ultimate Result: Flawless prints produced even when slight machine deformation has already occurred!
Machine Weight Matters: Our robust construction significantly minimizes deformation. The heavier the machine, the less distortion occurs!

With 8+ Years of R&D on the Chamber Temperature of FFF Industrial Printers

Our Solution: The Synergy of Two Patented Technologies—Intelligent Chamber Heating Algorithm & Z-Axis Magic Box Technology:

Intelligent Heating Algorithm: Predicts and counteracts irregular deformations caused by chamber temperature variations
Z Axis Magic Box: Maintains flawless surface finish via real-time thermal compensation for frame and build-plate expansion.
Ultimate Result: Flawless prints produced even when slight machine deformation has already occurred!
Machine Weight Matters: Our robust construction significantly minimizes deformation. The heavier the machine, the less distortion occurs!

Outage Restore & Filament Detection & Backup Mode

The printer automatically memorizes the current position and saves print data when power is interrupted. Upon restart, it resumes printing from the exact point of interruption, eliminating the need to restart entire prints and saving valuable time and material costs.

The printer also prevents failed prints by pausing and alerting you when the filament runs out, allowing you to replace the spool and continue printing without losing progress.

Backup Mode: If the filament in the main nozzle (No. 1) is exhausted, the printer automatically switches to the secondary nozzle (No. 2) to continue printing, ensuring uninterrupted production even during filament changes.

Magnetic Suction Platform

Proprietary magnetic platform, large, easily removable, and heat-resistant over 100°C, and won’t demagnetize over time.

For oversized models, it is easy to detach them quickly and the bottom of the model is flat. Convenient to all operators.

Linear Rail and Servo Motors

When the length reaches 1000 mm or more, small guide rails tend to deflect significantly. The D600 SE adopts heavy-duty linear guides and servo motors to ensure smooth and precise motion even at high speeds, without compromising the accuracy and reliability required for large-format printing.

True External Air Cooling

Medical-Grade Cooling Pump

Print Head Thermal Protection

True Air Model Cooling

Ultra-Quiet & Reliable: Equipped with a medical-grade pump, it delivers powerful, constant air pressure with minimal noise. Engineered for 24/7 operation, it ensures a quiet and stable workflow for professional environments.

Filament Dry Room

Our 3D printer features an integrated filament drying compartment, which maintains a controllable temperature environment of 0-70°C. Designed to prevent moisture absorption in hygroscopic materials such as nylon, PC, PA-CF, PET-CF, It eliminates printing defects like bubbling and stringing, ensuring consistent, high-quality output throughout the printing process.

Independent Quad-Z Axis

Quad-Z Auto-Leveling

Superior Load Capacity & Stability

Anti-Tilt & Torque Correction

Superior Layer Consistency

Eliminate Manual Leveling for Absolute Flatness: The independent four-motor drive allows for individual height compensation at each corner of the platform. The system automatically detects and fine-tunes the vertical height of every corner to ensure extreme parallelism between the build plate and the gantry, completely solving first-layer adhesion issues for large-scale prints.

Ultra Air Filter System / 99.995% Adsorption

Our advanced air purification system employs a dual-filter design: an initial HEPA filter captures fine particles, while an activated carbon filter absorbs volatile organic compounds (VOCs) and odors. This ensures a clean and safe printing environment, protecting both the operator and the printed parts from harmful emissions.

Technical Specs

Printing
Print Technology	FDM
Build Volume	Single extrusion:600 x 600 x 600mm Dual extrusion:545 x 600 x 600mm
Number of Nozzles	Double
Auto rising extruders	Yes
Min layer height	0.05mm
Filament Diameter	1.75mm
Filament Compatibility:	PLA, ABS, ASA, PP, PETG, PC, Nylon, TPU, ABS-CF, PC-CF, PET-CF, PET-GF, UltraPA-CF, PPS-CF, etc, PA-GF, PA-CF, PA-ABS, PC-ABS, PP-GF, PP-CF
Nozzle Diameter	0.6mm (0.3, 0.4, 0.6, 0.8,1.0mm)

Temperature
Max. Nozzle Temperature	420°C
Max. Bed Temperature	100°C
Max. Chamber Temperature	60°C
Filaments Drying Temperature	0-70°C (Timed)

Speed
Max Print speed	300mm/s
Flow Rate	90 mm³/s

Electrical
Power Requirements	240V, 50-60Hz
Rated Power	4900W
Screen	7-inch Touchscreen
Connectivity	USB/U disk/WiFi/LAN

Software
Software Bundle	CreatWare, OrcaSlicer, Cura,Slice 3r
Supported File Types	Gcode, STL, 3MF, OBJ, AMF, STP, STEP
Operating Systems	Windows ALL / Mac OS

Special Function
Air filter	HEPA+Carbon
Filament Detection	Pause Printing
Firmware	Klipper - High Speed
Dual Nozzle Shutter	Yes
Bed Leveling Technology	Eddy Current Leveling
Z Offset Technology	Dual Photoelectric Sensor
Nozzle Shutter Technology	Dual nozzle shutter
Chamber Insulation	Internal Insulation Cotton
External Air Cooling	Yes

Mechanical
Build Plate	Aviation Aluminum Plates
Build Plate Leveling	Automatic
Extruder	Smart Dual Extruders
Auto-Raising Extruders	Yes
X/Y Positioning Precision	0.0127 mm
Z Positioning Precision	0.005 mm
Z-Axis Structure	Independent Quad-Z Axis