By installing free software from our site you are using installers that are powered by creatbot.com (referred to as 'Software' and 'Application'). All products on our website use this End User Agreement License. We want to make our diclosure as clear as possible for you, and you will also always have a link to the End User License Agreement from within the installer when you first run it.
On each of our software pages it will specify the exact distribution license the specific software title uses. By installing this software you are agreeing to be bound by this End User License Agreement, and all applicable laws and regulations, and agree that you are responsible for compliance with any applicable local laws. If you do not agree with any of these terms, you are prohibited from using or installing the Software. The materials contained within the installer and software are protected by applicable copyright and trade mark law.
1. Use License
Permission is granted to temporarily download one copy of the materials (information or software) on CreatWare's Installer for personal, non-commercial transitory viewing only. This is the grant of a license, not a transfer of title, and under this license you may not:
modify or copy the materials;
use the materials for any commercial purpose, or for any public display (commercial or non-commercial);
attempt to decompile or reverse engineer the application;
remove any copyright or other proprietary notations from the materials; or
transfer the materials to another person or 'mirror' the materials on any other server.
This license shall automatically terminate if you violate any of these restrictions and may be terminated by creatbot.com at any time. Upon terminating your viewing of these materials or upon the termination of this license, you must destroy any downloaded materials in your possession whether in electronic or printed format.
The materials on CreatWare's Installer are provided 'as is'. The application makes no warranties, expressed or implied, and hereby disclaims and negates all other warranties, including without limitation, implied warranties or conditions of merchantability, fitness for a particular purpose, or non-infringement of intellectual property or other violation of rights. Further, the CreatWare's Installer does not warrant or make any representations concerning the accuracy, likely results, or reliability of the use of the materials on contained within the application.
In no event shall Software or its suppliers be liable for any damages (including, without limitation, damages for loss of data or profit, or due to business interruption,) arising out of the use or inability to use the materials within the Application, even if an authorized representative has been notified orally or in writing of the possibility of such damage. Because some jurisdictions do not allow limitations on implied warranties, or limitations of liability for consequential or incidental damages, these limitations may not apply to you.
4. Revisions and Errata
The materials appearing on CreatWare's Installer could include technical, typographical, or photographic errors. Download Manager does not warrant that any of the materials in the Application are accurate, complete, or current. Software may make changes to the materials contained in the Application at any time without notice. Software does not, however, make any commitment to update the materials.
Software has not reviewed all of the sites linked within the Application and is not responsible for the contents of any such linked site. The inclusion of any link does not imply endorsement by CreatWare's Installer of the site. Use of any such linked web site is at the user's own risk.
6. End User License Agreement Modifications
Software may revise the CreatWare's Installer End User License Agreement at any time without notice. By using this web site you are agreeing to be bound by the then current version of these Terms and Conditions of Use.
7. Governing Law
This End User License Agreement is applicable to Use of the CreatWare's Installer Software Application.
CreatWare Update Log
Add the nozzle cleaning function before printing
Fix problems that cann't be sliced in German and Russian
Add the F160 and F430 models
Optimize the D600 model default parameters
Optimize the D-Series and F-Series deault parameters
Repair some OEM information
Remove continute printing at breakpoint
Optimize the slice enging
Repair memory problems caused by the failure to save the slice file
Optimize USB online printing function
Optimize raft grid parameters, reduce the amount of filament
Optimizing the parameters such as the line width, the length of retraction
Adjust cooling fan related parameters
Add "fill flow" parameters
Add "support flow" parameters
Optimized layer view of platform adhesion style
Add version tag to gcode
Update slice engine to 15.04
Added D600 machine type
Modify the wall thickness to the combination of extrusion width and perimeters
Modify the top/bottom thickness to top layers and bottom layers
Added quickly open the expert settings buttons
Platform adhesion type default set to "Raft" and using "Airgap"
Models will be easier to remove, it is strongly recommended
Added "Infill prints after perimeters" option
Added "Only follow mesh surface" option
Default turn on fan on the first layer
Adding plug-ins reminder, timely uninstall unwanted plug-ins
Optimize "Enable combing" function
Fix View and translation issues
Fully optimize the print speed, shell speed and fill speed using percentage of global printing speed
Full support of 3 nozzle print function, repair the default main nozzle problems
Support gcode file above 250M
Adjust the default height value to 0.2mm, the printing effect is more delicate
The use of the latest cura kernel, faster, more stable, more functional
Adding new models 400 * 300 * 300 DE series models
The newly designed software interface, default simple interface
Optimize retraction parameters, and further optimize the printing effect
Optimization double printing parameters to further optimize the dual-nozzle print
Adding new models 300 * 250 * 300 DX series models
Full support for Windows 8.1, no longer need to run as administrator
Device driver through Windows 8.1 digital signature authentication
Add "Manual slice" approach instead of automatically slicing, more humane
Correction "Layer View" problem can not be properly displayed
Correction "Online Print" pause occasional problems
Optimize and streamline the program code
Added "Support structure type" function to facilitate the removal of support
Added "Outer shell speed" "Inner shell speed" function, print faster and smoother
Added "Automatic heating hot bed after printing is complete" function
Added "Automatically drop hot bed after printing is complete" function
Added "Initial layer Flow(%)" feature,first layer can be more firmly glued to the bench
Added "pre-pressurized first floor" function, the initial stage of the first floor of the wire can be a better
Enhanced multi-lingual capabilities, can switch the language without restarting
Multi Language Truly multi-lingual version
After installing run the First Run Wizard can assist leveling table
Support the new version detection, and download the new version from the CreatBot website
Perfect double nozzle function, Added "Outer shell speed" "Inner shell speed" function, print faster and smoother
Added "Continue print" function, no longer afraid of a power failure
Added "Close hot bed after N layers" function, energy saving and environmental protection
Added "print all models" and "one by one print each model" feature
Added "Default main extruder" feature
Re-layout ribbon and menu items, convenient interface to streamline
The new independent development kernel, large model can not fix part of the problem sliced
Add file association settings, and optimize some initial parameters
Repair support issues from the Z direction
Repair Raft chassis line spacing is abnormal
Add skirt line minimum print length feature
Add spiral print single-wall model features
Support any head printing support, adding extra yarn double switch, add at least use the supplies before returning to the wire length
Adding support density, distance, the new independent development kernel, stable and fast lead
Restored using high-speed slicing engine, and fix the original problem associated second nozzle.
Repair second nozzle print support issues, and the second nozzle offset value can not be negative problem.
Bug fixes for original
Bug fixes for original
CreatBot Enhanced ToolKit
Fan Cowl (DX DX+)
Can better cooling head and model, recommended download