D1000 HS

One Cubic Meter Industrial Grade Large 3D Printer.

D1000 HS is upgraded from the model D1000，it is a new high-speed printing version based on the in-depth development of Klipper. It adopts a new hotend with a flow rate of up to a record-breaking 90 mm³/s. The stable printing speed can reach 300mm/s, which is 5 times the speed of the D1000 model.

With a build volume of over 1000*1000*1000mm, it is the perfect machine for creating large and full size parts, prototype, tools, molds, jigs & fixtures in-house. Within days you can have a fully functional high quality prototype. CreatBot big rolls filament of PLA, ABS, ASA, PA-CF, etc suit well for your big models without worrying frequent replacement of filament. All its features manufactured to the highest standards. Every time, every parts, no mistake.

Every time, every parts, no mistake.

Get a quote Check Specs

Large-sized prototype manufacturing dedicated to engineering materials

Faurecia is a global advanced automotive system engineering and equipment supplier. They use the CreatBot 3D printer D1000 model to design and develop automotive seat molds, and are widely used in Audi, VW, NISSAN and GM motors. The molds in the video is their typical 3D printing product produced with D1000 3D printer. The Bowl and lid are required to withstand 100MPa, we choose Nylon-carbon fiber materials for the production with 50% infill. Finally, the prints performance is excellent and passed their strict testing!

Size worry-free For High strength prototype

The CreatBot D1000 was created to make industrial 3D printing of large-scale objects and prototype as easy as possible. It is embedded with many advanced technologies for ultra big, impressive prints. It will be your best choice with no doubt, if you are looking for an industrial large scale 3D printer for prototype and engineering-grade materials.

If you are tired of the fragility of PLA and the deformation of ABS, try our revolutionary material UltraPA-CF. Print your large model with a big size nozzle, in a few days, you will get an oversized model with high strength 80MPa and temperature resistance 150 ° C. The best choice for your prototype verification.

Size worry-free For High strength prototype

Design Prototype

Functional Prototype

End-Use Parts

Spare Parts

Forms & Molds

Auto-rising Dual Extruders 420 ℃

D1000 is embedded with new smart auto-rising dual-extruder kit with hotend temperature up to 420 ℃. The hotend can be replaced to different size one fastly. It is able to print not only huge PLA + water solubility materials PVA for prototype with fastest speed, but also ABS, PC, Nylon, Carbon Fiber and more high performance material for direct application. The dual-hotend is easy to maintain and affordable to replace.

Active Heated Chamber:

Reduces Thermal Stress & Warping

When printing large or high-strength engineering materials (e.g., ABS), uneven cooling causes internal thermal stress, leading to warping, delamination, or cracking.

Improves Interlayer Bonding

In low-temperature environments, excessive temperature differences between molten and solidified layers weaken adhesion. A controlled heated chamber maintains optimal layer temperature, enhancing molecular diffusion for stronger interlayer bonding.

Minimizes Moisture Impact

The heated chamber reduces ambient humidity’s effect on hygroscopic materials (e.g., nylon), preventing bubbles or strength loss caused by moisture absorption during printing.

Ensures Process Consistency

For industrial production, chamber temperature stability is critical for part-to-part uniformity. Active temperature control eliminates environmental variability, guaranteeing reliable repeatability.

Chamber Temperature Causes Printer Deformation.

In large-format FFF 3D printing, when chamber temperature rises, the printer frame and structural components also undergo thermal deformation—metal expansion, axis misalignment, and mechanical part displacement. These micro-distortions accumulate layer by layer, ultimately leading to:

1) Layer misalignment and surface roughness
2) Loss of dimensional accuracy
3) Structural defects in large parts

This is why chamber temperature as an optional add-on, or manufacturers claiming it can be retrofitted later, demonstrate a lack of fundamental understanding. They have no compensation for machine deformation—some aren’t even aware of the issue. They simply add it as a feature to meet customer demands, without considering print quality.

We have more than 8 years of research experience on the chamber temperature of FFF industrial printers.

Our Solution: Intelligent Chamber Heating Algorithm + Z-Axis Magic Box Technology Through the synergy of these two patented technologies:

1) The Intelligent Chamber Heating Algorithm predicts and counteracts irregular deformations caused by chamber temperature variations
2) The Z-Axis Magic Box Technology perfectly maintains surface finish by real-time compensation for frame and build plate thermal expansion
3) The ultimate result? Flawless prints produced even when slight machine deformation has already occurred!
4)3D printer's robust construction (machine weight matters) significantly minimizes deformation - the heavier the machine, the less distortion occurs!

Outage Restore & Filament Detection

The printer will automatically memorize the current position and save print data, lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power on. No trace!

The printer will avoid invalid printing by stopping print and warning when filament runs out.

Linear rail and Servo motors

When it reaches to 1000mm+ length, small rail have big deflection. The D1000 accurate linear rail structure is very thick and strong. It won’t deform or lose precision after print head million times shock.

With servo motors, with timeliness, fast response, no inertia, and no delay. closed-loop control of position overcome the problem of losing step. heat and noise are significantly reduced. It gives print model ultra high performance with high speed.

Filament Dry Room

The filament dry room provides chamber temperatures of 45°C and 65°C to dry 2*5kg/roll filament like PLA, nylon, PC, ABS and other materials with water absorption.

Auto Leveling Platform

Use of 100 points through the high precision servo probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

HEPA Air Filter

The air filter system can adsorb impurities and gases that generated by printing special filament like ABS, Nylon, PC, more safe and environmental protection which is more suitable for house, school, office space.

Camera Control Technology

Camera control technology allows customers to control printing process on speed, pause, temp. etc with an APP remotely, which can get best printing quality with shortest time without failure. A very useful feature on large model and long time printing.

CREATBOT D1000

1000*1000*1000mm
High resolution & speed
Camera control technology
Reliable 24/7
Fully enclosed

Stability

The whole-steel body not only ensures stability during printing but also greatly extends working life. The optimization and cooperation of overall structure ensure sustainable and efficient operation. The first batch of CreatBot 3D printers with whole-steel body have been working for 9 years and more than 30,000 hours.

Affordable And Reliable Large 3D printer

CreatBot D1000 was created to make industrial 3D printing of large-scale objects and prototypes as easy as possible. It is an industrial 3D printer that responds to market demand and is embedded with a new smart dual extruder kit, an enclosed heated chamber, automatic leveling system, and camera control for big, impressive prints.

Camera control technology allows customers to control the printing process with an APP, which can achieve the best printing quality in the shortest time without failure. With a fast-heating platform and hot chamber, this high-resolution large-print workhorse produces incredible results with high-quality materials.

CreatBot D1000 sets a new standard in additive manufacturing and extends the material capabilities of large-scale 3D printers, bringing the potential to greatly reduce costs and time for more companies.

Technical Specs

Printing
Print Technology	FDM/FFF
Build Volume	Single Extrusion: 100010001000 mm Dual Extrusion: 94010001000 mm
Number of Nozzles	Double
Auto Rising Extruders	Yes
Layer Resolution	0.05 mm
Filament Diameter	1.75 mm
Filament Compatibility	PLA, ABS, ASA, PP, PETG, PC, Nylon, TPU, ABS-CF, PC-CF, PET-CF, PET-GF, UltraPA-CF, PPS-CF, etc
Nozzle Diameter	0.8mm (0.3-1.0mm optional)
Print File Type	Gcode

Temperature
Max. Nozzle Temperature	420 ℃
Max. Bed Temperature	100 ℃
Hot Chamber Temperature	60 ℃
Filament Dry Room Temperature	0 ℃/70 ℃

Speed
Max Print speed	300mm/s
Flow rate	90 mm³/s

Electrical
Power Requirements	220~240 V, 50~60 Hz
Screen	10-inch full color touch screen independent operating system (multi-language)
Rated Power	Printer: 5500W, Chamber: 6000W
Storage Media	USB/U disk / WiFi / LAN

Software
Software	CreatWare, Orca Slicer, Cura, Simplify3D,Prusa, etc
Supported File Types	STL,OBJ,Gcode,AMF,STP,STEP
Operating Systems	Windows ALL / Mac OS

Special Function
Air filter	HEPA+Carbon
Filament Detection	Pause printing when filament run out
Firmware	Klipper - High speed
Camera control	Camera remote monitoring and real-time control of the printing process
Dual Nozzle Auto-Resume Printing	Auto-switch to backup nozzle on filament runout.

Mechanical
Build Plate	Aviation aluminum plates+removable magnetic platform
Build Plate Leveling	Automatic
Extruder	Smart dual extruderss
Auto raising extruders	Yes
X Y Positioning Precision	0.011 mm
Z Positioning Precision	0.0025 mm